ProTeam Spa
System Clean

Eliminates buildup inside spa plumbing


  • No foaming


  • Restores plumbing in spa to original condition


  • Apply only to spas and hot tubs that are currently are heated above 90⁰F (32⁰C) .
  • With the spa jets turned off, apply entire contents (16 fluid ounces) of the product directly to the spa. 16 ounces will treat up to 750 gallons.
  • Turn on the spa jet motor on highest setting for 5 minutes.
  • For older spas that have never used this product before leave jets on for 10 minutes.
  • If applicable, as water is circulating turn spa diverters.
  • Allow spa to operate normally overnight. Do not use spa.
  • Afterwards turn on the jets on highest setting for 5 minutes.
  • Drain spa in the same manner you would do so normally. Clean spa surfaces.
  • Rinse and degrease spa filters using a cleaning agent for spa filters.
  • Spa may be immediately refilled afterwards; operate spa normally.

Available Sizes

  • 1pt. bottles (12 per case)